3. Serial Ports

The first thing to do is to make sure the software can find the mouse. Work out which serial port your mouse is connected to - usually this will be /dev/ttyS0 (COM1 under DOS) or /dev/ttyS1 (COM2). (ttyS0 is usually the 9 pin socket, ttyS1 the 25 pin socket, but of course there is no hard and fast rule about these things.) There are also an equivalent number of /dev/cua devices, which are almost the same as the ttyS ones, but their use is now discouraged. For convenience make a new link /dev/mouse pointing at this port. For instance, for ttyS0:

ln -s /dev/ttyS0 /dev/mouse

Home :: Copyright :: Privacy :: Credits :: Get a free Linuxinfor Email Account

Document on this page is part of "The 3 Button Serial Mouse mini-HOWTO". See Index Page for more info about Authorship and Copyright.

1999-2008 Linuxinfor.com. No rights reserved.